Morand Industries Ltd is a proud supporter of Rodeo's across Alberta.

Morand’s Herringbone Pens allow you to pre-sort and stage your animals, to ensure the event moves smoothly without delays. These pens are installed between the holding pens and the Timed Event chute in the arena. Our pens have the ability to stage 5 steers, or 10 steers in the picture above.

Specifications

• frame is 2 3/8" .125 wall

• rails are 1.9’’ .083 wall 14 gauge tubing

• gates on both ends, with spring load

• panels connect with pins to the herringbone frame

  Herringbone Pens can be custom built to the size or number you require.

Morand's Calf Roping Chute is designed to be as quiet as possible. This is important for the horses to hear the riders commands and not the banging of the head gates.

4 pins included

Specifications

Width: 36’’ wide

Length: 7’ long

Height: 5’ tall

The Stripping Chute is used to help strip the rigging from the bull or bronc. Our chute includes a rolling door at each end with heavy duty rails between the doors.

4 pins are included.

Specifications

Width: 37’’ wide

Length: 8’ long

Height: 7’ tall

Bucking Chutes are available in a set of 3 or 6.

Specifications

25' long- each box 8' long

Side panels-6' tall

Frame- 7'6" tall

Catwalk- 4'x8' long, folding platform

Material:

Door Frame- 2 3/8" .190 wall

Sides- 2 3/8" .125 wall

Rails- 1.9" .100 wall

Skids-3"x8" tubing

Catwalk- 1 1/2" sq. tubing frame with expanded metal floor