Lead Up Pen

MORAND’S LEAD UP PEN (connected to the System #1 in this photo)

    • Heavy Panels at Morand Industries Ltd are constructed of 1.9’’ .083 wall, 14 gauge tubing.

    • The Heavy Overhead gate is constructed of 1.9’’ .083 wall, 14 gauge tubing and the frame is constructed out of 2 3/8’’ .125 wall.

    • The Heavy Walk In gate is constructed of 1.9’’ .083 wall, 14 gauge tubing and the frame is constructed out of 2 3/8’’ .125 wall.

    • The 10’ Spreader goes in between the four panels, giving it more strength to withstand the crowding of animals being sorted into the Tub.

    • Comes with sixteen pins to connect to the next panel, overhead, walk in, tub system, etc.

    • The Lead Up Pen package consists of 3-12’ Heavy Panels, 1-12’ Heavy Walk In, 1-10’ Spreader, 1-10’ Heavy Overhead

    • The Lead Up Pens are designed to bring your bison and cattle, into the Tub System in a more effective way for sorting.

    • Having a Walk In Gate, allows you access to the Lead Up Pen, from the alley section, without having to enter the pens at the far side.

    • Extra Lead Up Pens can be added on and/or bigger holding pens, for sorting a larger herd, down to smaller number of animals in each pen.

Morand Heavy Panel

HEAVY PANELS

    • Heavy Panels at Morand Industries Ltd are constructed of 1.9’’ .083 wall, 14 gauge tubing.

    • Comes with two pins to connect to the next panel, overhead, walk in, tub system, etc.

    • 7 bar and 8 bar available

    • 8 - 20 ft lengths available

    • Heavy Panels are part of the lead up pens that connect to the cattle & bison systems. They can used in perimeter fencing for larger holding pens or in pressure areas ( smaller pens) to start processing the animals.

HEAVY OVERHEAD GATES

    • Heavy Overhead Gates at Morand Industries Ltd are constructed of 1.9’’ .083 wall, 14 gauge material, and the frame is constructed out of 2 3/8’’ .125 wall.

    • Comes with two pins to connect to the next panel, overhead, walk in tub system etc.

    • Heavy Overhead Gates can be stretched up to 10 ft tall with:

    • 7 bar and 8 bar available

    • The height of the frame is 7 ft 6 inch.

    • Gates come with spring load latch.

    • 8, 10 & 12 ft lengths available

    • Overhead Gates are used in your Lead up pens for your Cattle or Bison Systems.

Heavy Overhead Heavy Panel

HEAVY OVERHEAD HEAVY PANEL

    • Heavy Overhead Heavy Panels at Morand Industries Ltd are constructed of 1.9’’ .083 wall, 14 gauge material, and the frame is constructed out of 2 3/8’’ .125 wall.

    • Comes with two pins to connect to the next panel, overhead, walk in tub system etc.

    • Heavy Overhead Heavy Overheads can be stretched up to 10 ft tall with:

    • 7 bar and 8 bar available

    • The height of the frame is 7 ft 6 inch.

    • 8-24 ft lengths available

    • option to put in 2 gates inside the frame

    • Overhead Panels can be used in your Lead up pens for your Cattle or Bison Systems.

    • Great option to have is to get 2 gates inside the 24 ft Panel

HEAVY WALK IN GATES

    • Heavy Walk In gates at Morand Industries Ltd are constructed of 1.9’’ .083 wall, 14 gauge tubing, and the frame is constructed out of 2 3/8’’ .125 wall.

    • Comes with two pins to connect to the next panel, overhead, walk in, tub system, etc.

    • Heavy Walk In Gates can be stretched up to 10’ tall.

    • 7 & 8 bar options available

    • The height of the frame is 7 ft 6 inch.

    • 8, 10, 12, 14, 16, 18, 20 ft lengths available

    • The gate can be up to 12’ long, inside of the walk in. Standard gate size is 5 ft long.

    • Walk In Gates are used in your Lead up pens for your Cattle or Bison Systems.

Morand Heavy Entrance Gate with Optional Wheel
Morand Heavy Entrance Gate

HEAVY GATES

    • Heavy Gates at Morand Industries Ltd are constructed of 1.9’’ round tube, .083 wall, 14 gauge material

    • 12’’ threaded rod to put through your posts

    • Optional: wheel kit available

    • 6 bar @ 48 in. tall

    • 7 bar @ 57 in. tall

    • 8 bar @ 66 in. tall

    • 9 bar @ 75 in. tall

    • Chain closure, but spring loads can be added at an additional charge.

    • 4 - 20 ft lengths available, in 6 & 7 bar

    • 4 - 16 ft lengths available in 8 & 9 bar gates

    • Anywhere that you need a gate. Driveway entrances to your farm, ranch, field, livestock pens, acreage, cottage, lake lot and more!

Morand Hex Feeder
Morand Slant Bar Feeder Panel
Morand Slant Bar Feeder Panel
Morand Heavy Creep Feeder Panel

FEEDER PANELS

    • 1.9’’ .083 wall, 14 gauge material

    • 18 Feeder Stations

    • 7’ diameter

    • 57 1/2’’ tall

    • Insert 8’ or 10’ slant bar feeder panel between two sides to make a 3 bale feeder

    • Comes with 2 pins to connect to the next panel

    • 1.9’’ .083 wall, 14 gauge material

    • 8’ & 10’ lengths available

    • Feed stations in each panel 8’- 5; 10’ 6

    • Comes with 2 pins to connect to the next panel.

    • 1.9’’ .083 wall, 14 gauge material

    • Sheet metal on bottom to keep in hay

    • 63’’ tall

    • 8’, 10’, 12’ lengths available

    • Feed stations in each panel 8’- 4; 10’ 5

    • Comes with 2 pins to connect to the next panel.

    • 1.9’’ .083 wall, 14 gauge material

    • 16 inch spacing between vertical rails

    • Adjustable height bar

    • Hooks up to Heavy Panels

    • Comes with 2 pins to connect to the next panel.

Morand Custom Ranch Gates with Custom Name Cutout
Morand Custom Ranch Gates with Custom cutout Logo Sign
Morand Custom Ranch Gates
Morand Custom Ranch Gates with Custom Cowboy & Horse cutout

MORAND’S CUSTOM RANCH GATES

  • Customize your Ranch Gate to fit your driveway:

    • The two on the left are similar in style, just different in size - narrow vs wider.

    • Morand Gate is 24 ft wide, 18 ft high and the side panels (wings) are each 24 ft long.

    • Another custom gate footage was 32 ft long!

  • Customize your Estate Gate

    • Customize the length to your driveway specifically

    • Customize your center cutout to suit your likes.

Heavy Overhead

Heavy Gates

Heavy Panel